Air-conditioner installation prices in Tashkent

Installing a split air conditioner in Tashkent costs between UZS 450,000 and UZS 700,000, depending on equipment class: a 9–12 unit is UZS 450,000, an 18 unit is UZS 500,000 and a 24 unit is UZS 700,000. Diagnostics is UZS 200,000, while cleaning one indoor or outdoor unit is UZS 300,000. Prices were checked on 24 August 2026.

How much does air-conditioner installation cost in Tashkent?

The price list separates installation by split-system size. Larger equipment has a higher installation price. A floor-standing column air conditioner is a separate UZS 1,200,000 service. Moving an existing split system is also a separate UZS 650,000 operation, not an ordinary installation at a new address.

Catalogue prices cover the master’s work. Copper line, drainage pipe, cable, brackets, fasteners and other consumables are agreed separately. Before approving the checklist, ask what materials are already available, what must be bought and which preparation operations are required at the property.

Daytime installation and maintenance prices

These are daytime prices. A separate night price list applies from 20:00 to 08:00, with a night minimum order of UZS 200,000. The daytime minimum is UZS 150,000. There is no separate weekend surcharge or multiplier that a master can set independently.

What may appear as a separate line

The property may require wall chasing for the air-conditioning line in addition to installation; that service is UZS 100,000. If the system is being moved, the UZS 650,000 relocation item applies. These operations must not disappear into one verbal total: each must appear in the checklist before installation begins.

Materials should also remain separate from labour. Ask for the line length, number of fasteners and other consumables to be stated clearly. If material remains after installation, the customer should understand how much was used and what was paid for.

Agree the position of both units separately. The indoor unit needs clear access for filter cleaning, while the drainage route must carry water away without leaks into the room. For the outdoor unit, the master should assess the strength of the mounting surface, future service access and a safe installation method. If facade work requires extra conditions or equipment, this must be stated before the order is approved rather than after installation.

When cleaning, diagnostics or refrigerant is needed

Weak cooling does not automatically mean that refrigerant should be added. Dirty filters or heat exchangers, a leak, poor heat rejection at the outdoor unit or an electrical fault can produce similar symptoms. When the cause is unknown, the UZS 200,000 diagnostics service is the sensible first step.

Indoor and outdoor unit cleaning are two separate UZS 300,000 services. If both are required, the checklist should contain two lines. A top-up is UZS 400,000 and a full charge is UZS 600,000. If a leak is suspected, the cause should be found first: leak detection and line brazing is a separate UZS 300,000 service.

What to check before the master arrives

Clear access to the indoor unit and the outdoor installation area. Move items that could get wet during cleaning. Show the existing outlet, intended line route and condensate drain location in advance, but do not dismantle the unit yourself.

Before approving the checklist, confirm:

1. The split-system class is correct: 9–12, 18 or 24.
2. Installation, relocation, wall chasing and line repair are not bundled into one item.
3. Indoor and outdoor units are counted separately when cleaning both.
4. Materials and quantities are agreed before purchase.
5. Refrigerant work follows diagnostics rather than replacing a search for the cause of a leak.

Work should be performed with power safely isolated. Do not wash a connected unit or open the refrigerant circuit yourself. General guidance is on the safety page, and professional checks are explained on the masters page.

How to accept the work

After installation or maintenance, run the system with the master. Check that it starts without unusual noise or vibration, air flows evenly, and condensate drains outside rather than dripping indoors. The test result and every additional operation should match the approved checklist.

Payment is made directly to the master after completion, in cash or by card transfer. Answers about payments and cancellations are in the frequently asked questions. To request a professional, download the UBASE app.

Summary

UZS 450,000–700,000 is the main labour-price range for installing a domestic split system. Materials and line preparation should be agreed separately before installation. When cooling is weak, identify the cause first, then choose cleaning, leak repair or refrigerant work. This order prevents unnecessary service and keeps the final total verifiable.